-
On Lunar firmware versions 2.5.067 and below, accessing the Lunar's Settings Menu is the same as the Pearl.
-
While your scale is off, hold the Power Button until it shows "nACAIA" -> "SEt", and then hold the T button at the same time.
-
Hold both buttons until you hear a beep and the display shows F.0000. Release both buttons.
-
Long-press T four times to enter passcode "0000" and enter the Settings Menu.
-
Tap the T button to scroll through all the settings
-
Long-press the T button to edit a setting
-
Tap T to scroll through the setting's options
-
Long press T to save your selection
-
On Lunar firmware versions 2.6.003 and newer, the way to enter the Settings Menu is slightly different.
-
While your scale is off, hold the Power Button until it shows "nACAIA" -> "SEt". Now release the power button and tap the T button. The scale will now enter the Settings Menu. There is no need to enter a passcode.
-
Tap the T button to scroll through all the settings
-
Long-press the T button to edit a setting
-
Tap T to scroll through the setting's options
-
Long press T to save your selection
-
Lunar 2021
- Long press the Power button to enter settings.
- Tap the T button to scroll through all the settings
- Long-press the T button to edit a setting
- Tap T to scroll through the setting's options
- Long press T to save your selection